OEM/ODM Factory in China
Customer Service Hotline:
+8613261677119
OEM/ODM Factory in China+8613261677119
TL;DR - The Mistairhome WL-AH02Q (PRO) holds 425 mL and mists 37 mL per hour or 17.2 mL per hour, which is 11.5 hours and 24.7 hours per fill; the oil side takes 4.1 mL and runs 12.8 hours per fill at 0.32 mL per hour; it covers 13 sq m (142 sq ft) at a 2.6 m ceiling and measures 21.0 dB on the high step and 18.6 dB on the sleep step; it draws 3.0 W and takes its supply from USB-C 5V/1A or the supplied mains adapter; oil pad in a drawer below the outlet, so a scent change does not mean emptying the tank; the humidistat holds target band 30 to 75 percent in 5 percent steps, held within 3 percent over Wi-Fi 2.4 GHz with Bluetooth fallback for first pairing, and night schedule with a wind-down hour and a wash-day reminder, voice runs through Amazon Alexa and Google Home for on off and the night step; no internal cell on this build; it weighs 460 g and measures 13.4 x 13.4 x 20.2 cm, and ships documented to CE / RoHS / FCC standards for import into Portugal. MOQ is 200 units per SKU with a 20-30-day lead time, FOB Shenzhen or EXW Longgang.
China Wanlin supplies the Bedroom Aroma Humidifier for Baby category as a direct manufacturer, not as a trading intermediary. The unit described below is one configuration out of 24 combinations (8 chassis x 3 SKU builds) that share a common misting family, a common oil path and a common documentation set, so a distributor can build a coherent shelf from one source rather than stitching together unrelated suppliers. Every unit referenced on this page corresponds to a specific bill of materials held on file, so the figures below can be reproduced or independently verified at sample stage.
The scent path is the part that separates this range from a humidifier with a few drops poured into the tank. The oil sits in its own tray or pad above the water line, on seals rated for citrus and resin blends, so the disc, the tank and the gasket never contact the oil. That is what keeps a scented unit serviceable for years rather than seasons, and it is the first thing we ask a buyer to check on a competitor sample.
Full specification of WL-AH02Q-PRO:
| Misting method | Ultrasonic piezo disc at 2.4 MHz on a double isolation seat, with a low-turbulence outlet baffle |
| Tank capacity | 425 mL |
| Mist output on the high step | 37 mL per hour |
| Mist output on the low step | 17.2 mL per hour |
| Run time per fill on the high step | 11.5 hours |
| Run time per fill on the low step | 24.7 hours |
| Coverage area | 13 sq m (142 sq ft) at a 2.6 m ceiling |
| Noise at 1 m on the high step | 21.0 dB |
| Noise at 1 m on the sleep step | 18.6 dB |
| Scent delivery method | Oil pad in a drawer below the outlet, so a scent change does not mean emptying the tank |
| Oil tray capacity | 4.1 mL |
| Oil contact parts | Glass-lined pad holder with a PP lid, chosen because citrus oils craze bare ABS |
| Scent intensity control | Two intensity steps, both below the level that carries across a shared wall |
| Scent run time per tray fill | 12.8 hours |
| Oil use per hour | 0.32 mL per hour |
| Water type | Tap or distilled; the isolator is the reason the sleep figure is two decibels lower |
| Mineral dust handling | Cartridge bay in the tank neck, one cartridge included on the Pro build |
| Fill method | Top fill with a wide mouth and a level window readable from a bed |
| Battery pack | Not fitted, runs from the USB-C supply |
| Cordless run time | Not applicable, mains or USB powered |
| Charge time | Not applicable, no internal cell |
| Power input | USB-C 5V/1A or the supplied mains adapter |
| Rated power on the high step | 3.0 W |
| Control interface | Capacitive panel with three mist steps, night mode and a scent on off pad |
| Network link | Wi-Fi 2.4 GHz with Bluetooth fallback for first pairing |
| App platform | night schedule with a wind-down hour and a wash-day reminder |
| Voice assistant support | Amazon Alexa and Google Home for on off and the night step |
| Humidistat range and accuracy | target band 30 to 75 percent in 5 percent steps, held within 3 percent |
| Scheduling | Seven day schedule with four events per day and a sleep window |
| Night light | Amber dot only, no ring, and it switches fully off for light sleepers |
| Protection | Dry-run shut-off, tilt switch, overcurrent limit, sealed base gasket |
| Dimensions | 13.4 x 13.4 x 20.2 cm |
| Weight | 460 g |
| Warranty | 18 months |
| Shipped kit | Pro build, + spare misting disc + demineralisation cartridge + 5 oil pads + multilingual manual |
| Units per master carton | 32 |
| Lead time | 20-30 days |
The strongest pull in Portugal now comes from hospitality, retail and facilities buyers rather than households, because they can put a number on complaints, on dwell time and on room-turn minutes, which makes the decision easy to defend internally. Market entry cost keeps falling because small-batch first orders are viable: a distributor can test a range without committing to full container quantities on unproven models.
Returns in the Bedroom Aroma Humidifier for Baby category cluster around three causes: mineral dust on hard water, a scent that is stronger than the room wants, and a tray that cannot be cleaned. All three are answered at quotation stage rather than after arrival. This is why the table above states figures by model rather than by marketing tier: a buyer comparing two SKUs needs the noise on the sleep step, the run time per fill and the oil handling side by side, because those three predict both satisfaction and return rates better than any other set.
Wanlin serves Portugal through three programmes that suit different balance sheets. New partners start with sample evaluation then a mixed trial order. Established distributors move to scheduled container shipments with locked pricing windows. Brand owners run private-label programmes with their own artwork and manuals. In all three cases the factory documentation, including the certificates and oil declarations listed further down this page, references the specific model code on the order rather than a generic family certificate, which is the most common cause of customs delay in this category. On the WL-AH02Q (PRO) the figures worth carrying into the next order are the 425 mL tank, the 12.8 hours of scent per oil fill, and the 18.6 dB reading on the sleep step.
The decision that matters most in this category is not output, it is what the unit does with dissolved minerals, and it is the one most often sold badly. An ultrasonic disc atomises water, and with it everything dissolved in that water, so on a hard supply the minerals become airborne and settle as a fine white film on whatever is nearby. Two answers exist and we build both: a demineralisation cartridge in the tank, which is a consumable with a real working life, or a scented build run on distilled water in markets where the supply is known to be hard.
The second decision is the cleaning path, which is an engineering decision long before it is a marketing one. Standing water at room temperature grows biofilm, and a tank with oil residue in it grows it faster, so the honest interval is every five to seven days in continuous use and every three to four days where a scent is run daily. A tank a hand cannot reach into is a tank that never gets cleaned properly, which is why the openings on this range are sized for a hand and a brush rather than for a photograph.
The third is the control loop. A fixed mist step ignores the room entirely, so a sealed room overshoots while a draughty one never arrives, and a scented room that overshoots is a room that smells wrong. A humidistat with a stated target band, fed by a sensor calibrated at the factory and re-checkable by the buyer with an ordinary hygrometer, is the difference between a product that holds a number and one that merely runs. The WL-AH02Q (PRO) packs 32 units to a carton, carries 18 months of warranty cover and a 20-30-day stated lead time, and draws 3.0 W on the high step.
Three deployment records from the Bedroom Aroma Humidifier for Baby programme, each with the conditions that shaped it. Site detail is kept because it is the part that transfers: the water, the ceiling, the rota and the complaint are what decide whether a unit stays in service, and none of them appear on a specification sheet.
Deployment: A four-bedroom house in a gated compound, highland climate, dry season from June
Timing: Two dry seasons from June 2024
Nairobi's dry season is mild by any standard, and a buyer there does not need a large tank - what they need is a unit that runs quietly through the night on a small tank, because the water supply is intermittent and a large tank is a burden to fill. A 400 mL chassis with a night schedule is what went in, and the repeat order eighteen months later was for the same model in three more houses in the compound.
Deployment: A lakeside hotel with 48 rooms, closed for six weeks each November for maintenance
Timing: Two seasons from May 2025
What decided this order was the shutdown. A programme that needs to be drained, dried and stored for six weeks and then set up again by a caretaker is a programme that gets abandoned in the second winter, so the specification included a written storage routine and a dry-out before the closure. It sounds trivial; it is the difference between a hotel reordering in year three and one that quietly stops. The hotel reordered in October 2026 with the same model code.
Deployment: A 280 sq ft flat on the 19th floor of a 1960s block, air conditioning for eight months of the year
Timing: One year from July 2025
Space is the whole specification in a flat this size: the unit had to fit on a bedside shelf next to a phone charger and be filled at a bathroom sink, not carried to a kitchen. A 250 mL chassis with a screw base went in, and the buyer's second order six months later was for four friends in the same block. The pattern in dense cities is that the form factor decides the sale and the capacity decides whether the customer comes back.
The pattern across all three is that the deciding factor was never peak output. It was whether the tank lasted a full shift, whether the oil could be refilled inside the round, and whether anyone complained about the smell or the dust. Those are the questions we ask before quoting. The WL-AH02Q (PRO) packs 32 units to a carton, carries 18 months of warranty cover and a 20-30-day stated lead time, and draws 3.0 W on the high step.
Four placement patterns cover most of the enquiries we see for this category. The useful observation is that each one is answered by configuration and placement rather than by buying a larger unit, which is the default reflex and usually the wrong one.
| Scenario | Room or site | What the site needs | What the unit does |
| SC06-GUESTROOM | Turned around inside a fixed housekeeping window, twelve rooms to a round | A fill and a scent refresh inside the minutes the room already gets | Top fill from a jug at the bedside and a tray filled without removing the lid, so both tasks sit inside the existing round rather than adding to it. |
| SC07-CABIN | Parked vehicles that sit in the sun, where heat and smell arrive together | A sealed lid and a scent mild enough for a closed cabin | A cup-holder chassis with a sealed base runs on the vehicle supply, one scent level only, and stops when the disc runs dry. |
| SC08-SHOPFLOOR | Retail floors where the scent is part of how the brand is remembered | One scent across the floor, present at the door and not at the till | Two output levels by zone, with the entrance pair on a higher scent step than the interior, because the dose that works at a doorway is too much ten metres in. |
| SC09-HALL | Open-plan lobbies with a ceiling well above a residential one | Output sized against volume, with a target rather than a step | A large-tank chassis holds a measured target and stops when the room arrives, which is the only way a tall space is controlled rather than merely filled. |
Two of these four are decided before the unit is switched on: whether the tank lasts the interval the site can actually service, and whether the scent level is one the room will accept. For this configuration that means 17.2 mL per hour at 18.6 dB, holding 24.7 hours per fill and 12.8 hours of scent across a 13 sq m (142 sq ft) room.
Buying direct changes three things that no catalogue can show. The first is the bill of materials. A trading company quotes a price; a factory can tell you which disc, which seal and which tray is inside the unit, and what each of them costs to replace. That matters more here than in most categories, because the parts that wear are the parts that meet the oil, and they are the parts that decide whether the product is still in service in March.
The second is what happens when something goes wrong at the destination. A defect that traces to a single component is a component we stock, and it rides in the next container at the cost of the part rather than at the cost of a replacement unit. A distributor who cannot supply a seal or a pad loses the next appliance order along with the goodwill.
The third is the ability to say no. We will decline an ultrasonic build for a hard-water market without the cartridge, and we will decline a resin-heavy oil programme on a chassis with standard silicone seals, because both configurations produce a return rate rather than a reorder. A factory that can change the build is the only kind of supplier that can give that answer honestly. The WL-AH02Q (PRO) packs 32 units to a carton, carries 18 months of warranty cover and a 20-30-day stated lead time, and draws 3.0 W on the high step.
Market access for this product is mostly a documentation exercise, and the mapping is stable. Europe wants the CE technical file, an EMC report and IEC 60335-1. North America adds FCC documentation for the digitally controlled models. Japan and Korea issue against PSE and KC, Australia and New Zealand against RCM, and all four want the certificates to name the model being shipped.
The second thing worth knowing is what a certificate does not cover. It does not cover the scent, and a hospitality or childcare buyer will ask about the oil before it asks about EMC. We hold the IFRA statement, the allergen declaration and the MSDS per blend, plus a flash point figure for the transport classification, and those four are the documents that most often decide a hotel or clinic order.
The third is the battery and oil overlay together. Where a cell is fitted and an oil set ships in the retail box, both sit on top of the appliance documentation and each adds a step at freight booking. For a buyer shipping to several markets at once, the cheapest route is to declare the full destination list and the full oil list at quotation stage so the documentation is raised once, in one package, rather than market by market as each order lands. For this configuration that means 17.2 mL per hour at 18.6 dB, holding 24.7 hours per fill and 12.8 hours of scent across a 13 sq m (142 sq ft) room.
Three numbers decide whether this line works for a distributor, and the first one is not the unit price. Freight is the variable most buyers undercount: at 0.148 cubic metres per master carton of 32 units, a 20 ft container takes about 143 cartons, or roughly 4,576 units, and a 40 ft container about 316 cartons, or roughly 10,112 units. Those are volume figures before palletisation and loading losses, so a buyer should treat them as an upper bound.
The second number is the consumable. A misting disc is a wearing part with a service life measured in months of continuous use rather than years, and hard water shortens it considerably. Pads and cartridges sit on top of that, and where the programme ships oil, the oil is the fastest-moving line of the three. We suggest one spare disc per twenty units, one cartridge per unit where the water is hard, and a pad set per unit per year, and all of them ride in the same container as the appliances.
The third is the cost of a return. In this category returns split roughly evenly between mineral dust and a scent the room did not want, and both are prevented at specification stage rather than by a better returns process. For this configuration that means 17.2 mL per hour at 18.6 dB, holding 24.7 hours per fill and 12.8 hours of scent across a 13 sq m (142 sq ft) room.
What order size does Wanlin accept for a first aroma humidifier shipment?
200 units per SKU on standard builds, 300 where a custom colour or private-label packaging is involved, and several models may share one container provided each SKU clears its own minimum. For a buyer testing the category for the first time, a mixed container is the lower-risk route and is the one we recommend over a single-SKU container on an unproven model.
Is the scent too strong for a bedroom, and can it be switched off?
Scent is the most common cause of a unit being unplugged, so this range treats it as a setting rather than a feature. WL-AH02Q offers two intensity steps, both below the level that carries across a shared wall, and the tray can be left empty entirely, which is what most nurseries, shared offices and clinical rooms specify. A bedroom on the low step sits well under anything a neighbour would notice, and the light, amber dot only, no ring, and it switches fully off for light sleepers, switches fully off.
Will an ultrasonic aroma humidifier put mineral dust on dark furniture?
On hard water, yes, unless the build deals with it. The disc atomises the water and everything dissolved in it, and the minerals settle as a white film. For WL-AH02Q-PRO the answer built into the specification is cartridge bay in the tank neck, one cartridge included on the pro build. Where a buyer wants the question removed entirely, running on distilled water removes it without any cartridge.
What documentation comes with an aroma humidifier shipment for customs?
CE technical file, RoHS and REACH declarations, an EMC report and the IEC 60335-1 appliance safety report as standard, plus UN38.3, IEC 62133 and MSDS on any build carrying a cell, and FCC for the digitally controlled models going to North America. Where oil ships with the unit: an IFRA statement of conformity, an allergen declaration, an MSDS per blend and the flash point figure that decides transport classification. Every document names WL-AH02Q rather than a family, which is what a customs officer checks.
Is private label available across the aroma humidifier range?
Across the whole range, including housing colour, logo, retail artwork, manual language, the accessory kit and the gift-box configuration. Most of it works inside existing tooling, so it does not add engineering time. What it does add is a decision about consumables, and we raise that early because the cartridge and pad choices affect the return rate more than any artwork decision does.
What is the cleaning routine, and how much staff time does it take?
Five to seven days in continuous use, or three to four where a scent runs daily, with a dry-out before any period of storage. The routine takes under two minutes on this chassis because the tank opening is wide enough for a hand and a brush, which is deliberate. A narrow-neck tank takes longer, gets cleaned less often, and eventually gets replaced - which is the real cost of a cheap moulding. Where a Portugal supply is hard the interval shortens rather than lengthens, and we would rather say that at quotation stage than have a buyer discover it from a complaint.
What happens if a unit fails inside the warranty period?
18 months on WL-AH02Q against manufacturing defect. In practice most failures outside the warranty period are a worn disc, a scaled cartridge or a seal that has met the wrong oil rather than a faulty appliance, which is why we stock all three as separate lines and ship them with the units. A distributor who can supply the part keeps the customer.
What is the timeline from sample approval to a shipped container?
From approved sample to a shipped container, 20-30 days for first production plus the freight booking step, which is longer on battery builds because of the cell documentation and on any order carrying oil because of the transport classification. Sampling itself is 5 to 7 working days on an existing specification. We put the production figure on the proforma invoice so it is a commitment rather than an estimate.
This is a programme for buyers who intend to reorder. The first order is rarely the profitable one for either side; what makes it worthwhile is a range that can be relisted next season without a new test round, a spares line that keeps customers, and a consumable that brings them back.
It suits distributors building an air-treatment or home-fragrance shelf, brand owners who want a chassis they can put their own artwork on, gift and fragrance companies planning an oil line alongside the appliance, hospitality groups standardising across several properties, and cross-border sellers who need prep done before the container moves.
It suits less well anyone whose only criterion is the lowest unit price, because the price difference between a well-built unit and the cheapest one on the market is smaller than the cost of the returns it prevents, and in this category the returns arrive as swollen seals and filmed discs rather than as dead appliances. The WL-AH02Q (PRO) packs 32 units to a carton, carries 18 months of warranty cover and a 20-30-day stated lead time, and draws 3.0 W on the high step.
The cleanest first orders we see share one habit: the buyer declares the destination list and the oil list at quotation stage. Certificates, manuals, plugs and transport classification all follow from those two lists, and raising them once as a package costs far less than raising them market by market as each order lands.
After that the sequence is ordinary. Sample evaluation first, on the actual specification rather than a similar one, with the buyer measuring mist output by a weighed run, run time per fill at the low step, oil use over a known number of hours, and noise at one metre in a quiet room. Then the proforma invoice, which carries the stated lead time and the packing list rather than leaving them open. Then production, then booking.
The one step buyers skip and regret is the spares decision. Adding a spare disc per twenty units, a cartridge per unit where the water is hard and a pad set per unit per year costs almost nothing on a first container and prevents the top-up shipment that otherwise arrives in the middle of the season. On the WL-AH02Q (PRO) the figures worth carrying into the next order are the 425 mL tank, the 12.8 hours of scent per oil fill, and the 18.6 dB reading on the sleep step.
If there is one thing to take from this page, it is that the oil path and the water answer are the two that decide the return rate, and both can be checked before an order is placed. Lift the tray on a sample and look at what the oil touches, and put the unit on the water it will actually be sold with.
Everything else - output, coverage, run time, oil use, documentation - is measurable and published here so it can be verified rather than taken on trust. Where the answer depends on the room we say so rather than quoting a number that only holds in a laboratory.
Wanlin supplies this range as a manufacturer and is open to partnership with distributors, brand owners, fragrance and gift companies, hospitality and facilities buyers, cross-border sellers and export traders. Samples, specification sheets and certificates are available on request. On the WL-AH02Q (PRO) the figures worth carrying into the next order are the 425 mL tank, the 12.8 hours of scent per oil fill, and the 18.6 dB reading on the sleep step.
Published by: Wanlin Manufacturing Group, MistAirHome Export Division
Published on: September 30, 2026
Data sources: in-house factory testing + misting disc and oil tray specifications + certification and oil declaration files + partner deployment records
Company address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
References: factory quality manual + third-party test reports + customer shipment records
Contact: Mistairhome@163.com / +8613261677119 / https://www.mistairhome.com
